RAM® X-Grip® Large Phone Mount with Low Profile Suction Base
Part#: RAP-B-166-2-UN10U UPC: 793442955594 Patented
B SIZE
Size Guide
Size Guide
The unique double ball and socket design allows you to adjust your mount to the perfect viewing or operating angle, all with the turn of a single knob. This modular design can be configured with a variety of interchangeable components to fit your specific mounting needs.
A Size
Holds .5 lbs
9/16" Ball
Trail Cameras
B Size
Holds 2 lbs
1" Ball
Phones
Action Cameras
Light Duty Tablets
C Size
Holds 4 lbs
1.5" Ball
Fishfinders
Heavy Duty Tablets
D Size
Holds 6 lbs
2.25" Ball
Monitors
Large Fishfinders
E Size
Holds 15 lbs
3.38" Ball
Heavy Monitors
| Ball Sizes | Short Arm | Medium Arm | Long Arm | |
|---|---|---|---|---|
| A Size | Overall Length | N/A | 2.11" | 3.57" |
| Socket-to-Socket Length | N/A | 1.67" | 3.12" | |
| B Size | Overall Length | 2.42" | 3.73" | 6.00" |
| Socket-to-Socket Length | 1.75" | 3.00" | 5.31" | |
| C Size | Overall Length | 3.56" | 5.69" | 9.13" |
| Socket-to-Socket Length | 2.50" | 4.66" | 8.00" | |
| D Size | Overall Length | 5.10" | 8.44" | 12.98" |
| Socket-to-Socket Length | 3.60" | 6.88" | 11.41" | |
| E Size | Overall Length | 7.31" | 12.63" | N/A |
| Socket-to-Socket Length | 4.98" | 9.88" | N/A | |
-
Overview
The RAP-B-166-2-UN10 consists of a 2.75" twist lock suction cup base, double socket system and universal spring loaded X-Grip® cradle for large phones. The suction cup, twist lock base is designed to have a strong hold on glass and non-porous plastic surfaces, including adhesive disks. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. The included X-Grip® cradle has a clean and clever four leg design that sports great holding power without hiding your phone behind foam pads and plastic. The spring loaded X-Grip® cradle expands and contracts, allowing for a perfect custom fit of your cell phone. The perfect complement to the modern sleek interior of today's vehicles, the RAM X-Grip® is the cell phone cradle evolved. The X-Grip® includes a device tether recommended for outdoor applications. The cradle is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size.
Purchase Includes:
- (QTY. 1), Optional Tether Included
Cradle Dimensions:
- Minimum Width = 1.75" (Minimum Height = 5.5")
- Maximum Width = 4.5" (Minimum Height = 3.25")
- Depth = 0.875"
- Material:Marine Grade Stainless Steel Components & High Strength Composite
- Ball Size:B Size 1" Rubber Ball
- Note:Part number reflects product packaged in a plastic poly bag. RAM highly recommends using the provided Tether for all open cockpit applications while using this product.
- Weight:0.43 lbs.
Additional Information
