Grip Thickness:
1/16" to 1/4"
Installation Instructions:
1. Locate RAM base to desired mounting location, drill holes with 7/32" drill.
2. Place Mari-Rivet™ body all the way through RAM base and pre-drilled 7/32" holes until flange is firmly secured against mounting surface.
3. Insert rivet gun over mandrel head.
4. Clamp rivet gun; this will initiate the jaws to retract, extracting the mandrel, which pulls the mandrel head into the rivet body setting the rivet. At a predetermined tensile load, the mandrel breaks from its head and is discarded.
Note:
The "U" in the part number reflects product packaged in poly bag.