RAM® Finger-Grip™ Universal Mount with Handlebar U-Bolt Base
Part#: RAM-B-149Z-UN4U UPC: 793442905582 Patented
B SIZE
Medium Arm
Size Guide
Size Guide
The unique double ball and socket design allows you to adjust your mount to the perfect viewing or operating angle, all with the turn of a single knob. This modular design can be configured with a variety of interchangeable components to fit your specific mounting needs.
A Size
Holds .5 lbs
9/16" Ball
Trail Cameras
B Size
Holds 2 lbs
1" Ball
Phones
Action Cameras
Light Duty Tablets
C Size
Holds 4 lbs
1.5" Ball
Fishfinders
Heavy Duty Tablets
D Size
Holds 6 lbs
2.25" Ball
Monitors
Large Fishfinders
E Size
Holds 15 lbs
3.38" Ball
Heavy Monitors
| Ball Sizes | Short Arm | Medium Arm | Long Arm | |
|---|---|---|---|---|
| A Size | Overall Length | N/A | 2.11" | 3.57" |
| Socket-to-Socket Length | N/A | 1.67" | 3.12" | |
| B Size | Overall Length | 2.42" | 3.73" | 6.00" |
| Socket-to-Socket Length | 1.75" | 3.00" | 5.31" | |
| C Size | Overall Length | 3.56" | 5.69" | 9.13" |
| Socket-to-Socket Length | 2.50" | 4.66" | 8.00" | |
| D Size | Overall Length | 5.10" | 8.44" | 12.98" |
| Socket-to-Socket Length | 3.60" | 6.88" | 11.41" | |
| E Size | Overall Length | 7.31" | 12.63" | N/A |
| Socket-to-Socket Length | 4.98" | 9.88" | N/A | |
-
Overview
The RAM-B-149Z-UN4U consists of a zinc coated u-bolt base, double socket arm and universal Finger Grip™ cradle. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. The RAM Composite Universal Finger Grip™ cradle is designed to hold a large amount of cell phones and electronic devices. The cradle comes with (3 sets) of four flexible rubber coated fingers placed along sides to grip your device. The fingers open by squeezing the ends to open the small finger arms. The bottom of the cradle includes a back plate that adds support to the device being held by the mount. The spine plate contains the universal AMPs and 1.5" x 2" hole patterns.
Dimensions:
- Minimum with Top and Bottom Supports: 5.25"
- Maximum with Top and Bottom Supports: 7.25"
- The top and bottom plates can be removed for larger devices.
Dimensions using Short Arm Clamps:
- Maximum Depth: 0.75"
- Minimum Width: 1.25"
- Maximum Width: 3.0"
Dimensions using Medium Arm Clamps:
- Maximum Depth: 1.25"
- Minimum Width: 1.5"
- Maximum Width: 3.5"
Dimensions using Long Arm Clamps:
- Maximum Depth: 1.6"
- Minimum Width: 2.25"
- Maximum Width: 3.5"
- Material:High Strength Composite and Powder Coated Marine Grade Aluminum
- Ball Size:B Size 1" Rubber Ball
- Plate Dimensions:3" Width x 3" Height
- Note:The "U" in the part number reflects product packaged in poly bag.
- Weight:1.05 lbs.
Additional Information
Components
