Samsung Galaxy S6 & S6 Edge Mount | RAM Mounts Blog
Samsung Galaxy S6 & S6 Edge Mount

Samsung Galaxy S6 & S6 Edge Mount

By rammountblog

March 5, 2015

Suction Cup Mount

Samsung Galaxy S6 Car Mount

See Product

Tough Claw Mount

Samsung Galaxy S6 Motorcycle Mount

See Product

Rail Mount

Samsung Galaxy S6 Bicycle Mount

See Product

RAM® X-Grip® Mount for the Samsung Galaxy S6

The RAM® X-Grip® line features a four leg design that offers impressive holding power without hiding your Samsung Galaxy S6 and S6 Edge behind foam pads and plastic. Simple to open and close, the spring loaded RAM® X-Grip® leaves the outside edges of your Samsung Galaxy S6 and S6 Edge almost completely free of annoying obstructions.

Soft rubber fingers apply just enough force to keep your Samsung Galaxy S6 and S6 Edge in safe and secure. The perfect complement to the modern sleek interior of today’s vehicles, the RAM® X-Grip® is the Samsung Galaxy S6 and S6 Edge holder evolved.

Samsung Galaxy S6 in an X-Grip mount
How the X-Grip mount works with the Samsung Galaxy S6


  • Versatility of holder allows for attachment to many RAM ball mounts
  • Rubber coated tips will hold device firm and stable
  • Spring loaded holder expands and contracts for perfect fit of your device
  • Stainless Steel Production
  • High Strength Composite Materials
  • Lifetime Warranty
You can position the Galaxy S6 Mount in any direction

Category: Product Tips and Tricks

8 thoughts on “Samsung Galaxy S6 & S6 Edge Mount”

  1. Hi There,
    I own at present a Galaxy S5 and later in the year will upgrade to the Galaxy S6. Will the versatility of the X-Grip hold both phones?
    I also must stress about a video I saw on Youtube where this guy has a X-Grip mounted on his bike and whilst riding the phone actually flies off his bike?!?
    I own a 2013 Kawasaki zzr1400 and will be wanting a Stem Mount and the phone mounted horizontally and as low down as possible to visualize the GPS.
    I would like to know from you should I reach speeds of 200+Kph will my phone stay put? Maybe the Finger Grip model you make looks for a better bet? Even if the slots provided be made a tad longer using a small round file to accommodate the phones.

    Hope you guys can help me out here.
    Best Regards

    1. The versatility of the RAM-HOL-UN10BU will hold both the S5 and S6 comfortably. If you are riding in access of 200+Kph I would recommend a tether for your mount. The RAM-B-176-UN4U with Finger-Grip is more robust than the X-Grip, and I would recommend this mount for high vibration environments.

      Thanks for the inquiry,

      RAM Mount

  2. The versatility of the X-Grip will hold both phones, one at a time.
    If you should I reach speeds of 200+Kph, I have no idea if the phone will stay in place. Do you think RAMMOUNT test their product to meet all idiotic ideas. They are not your private test facility! Buy one and try it. If it passes the test, send the information to RAMMOUNT. If it does not meet your needs and the phone flies off, buy a new phone. You could ask Samsung if the S5 Galaxy will with stand flying off a vehicle at 200+Kph.

    1. @Steve : your reply are also idiotic

      If you drive at 120Kph (normal speed on highway in my country) and you have wind if 40Kph in your face, it’s a total wind speed of 160Kps, right?

      Does the X-Grip can keep the Samsung S6 safely ?

      1. Steve,

        I would recommend a tether for your X-Grip in high vibration environments.

        Thank you for the inquiry,

        RAM Mount

  3. I have the galaxy s6 with an otterbox defender case on it… Will the xgrip hold it in the case or is it too bulky?

  4. How does this work with the S6 edge? The grips either hit the volume button on the left or the power button on the right. If you positopn it so its not hitting the buttons its too high or low and will probably fall out.

Leave a Reply to tony.ledenko Cancel reply

Your email address will not be published. Required fields are marked *