PRO-PULL PROPELLER REMOVAL TOOLS

Pro-Pullฎ Prop Puller Tools are the absolute best money can buy. Built for a lifetime of use, this quality line of products is a must for any serious boater. Made of only the finest materials and machined by people who take great pride in their craft, the Pro-Pullฎ name is one of distinction. Offered in many sizes, and styles, you are sure to find the perfect tool for your needs. Backed by a lifetime warranty, Pro-Pullฎ Prop Puller Tools are quite possibly the last tool of their kind you will ever need to purchase. With the right tool, the job just gets easier. With a Pro-Pullฎ Prop Puller, you will have the right tool.
PPF-101
1 1/8" Max. Shaft Diameter Brute Propeller Puller Kit W/ Shaft Saver Bolt

PRO-PULL Brute models are designed to remove, 2, 3, most 4 and some 5 blade propellers on inboard shafts ranging from 3/4” - 2”. They are made of high strength heat-treated alloy steel and finished with cadmium for protection. These tools have fine thread screws to enable a strong pulling force with little effort.


Description:
Kit includes: (3/4” - 1 1/8”) Shaft diameter propeller puller, a wrench for the puller and prop nut, a stainless steel cotter pin, a brass prop shaft key, a brass nylock prop nut, waterproof grease, safety lanyard and is packaged in a rustproof carrying case. Clearence required between propeller hub and strut is 1/4” minimum.


Weight:
6 lbs.

PPF-102
1 1/8" Max. Shaft Diameter Brute Propeller Puller W/ Shaft Saver Bolt

PRO-PULL Brute models are designed to remove, 2, 3, most 4 and some 5 blade propellers on inboard shafts ranging from 3/4” - 2”. They are made of high strength heat-treated alloy steel and finished with cadmium for protection. These tools have fine thread screws to enable a strong pulling force with little effort.


Description:
(3/4” - 1 1/8”) Shaft diameter tool only is the same propeller puller used in the PPF-101 Kit. Clearance required between propeller hub and strut is 1/4” minimum


Weight:
4 lbs.

PPF-118
1 1/2" Max. Shaft Diameter Brute Propeller Puller W/ Pointed Bolt

PRO-PULL Brute models are designed to remove, 2, 3, most 4 and some 5 blade propellers on inboard shafts ranging from 3/4” - 2”. They are made of high strength heat-treated alloy steel and finished with cadmium for protection. These tools have fine thread screws to enable a strong pulling force with little effort.


Description:
(1 1/4” - 1 1/2”) Shaft diameter propeller puller with removable handle and safety lanyard. Clearance required between propeller hub and strut is 5/8”.


Weight:
11 lbs.

PPF-119
2" Max. Shaft Diameter Brute Propeller Puller W/ Pointed Bolt

PRO-PULL Brute models are designed to remove, 2, 3, most 4 and some 5 blade propellers on inboard shafts ranging from 3/4” - 2”. They are made of high strength heat-treated alloy steel and finished with cadmium for protection. These tools have fine thread screws to enable a strong pulling force with little effort.


Description:
(1 5/8” - 2”) Shaft diameter propeller puller with removable handle and safety lanyard. Clearance required between propeller hub and strut is 3/4”.


Weight:
28 lbs.

PPF-103
1 1/2" Max. Shaft Diameter Heavy-Duty Propeller Puller

PRO-PULL Heavy Duty models are designed to remove 2, 3, most 4 and some 5 blade propellers on inboard shafts ranging from 1 1/4” - 3”. They are made of high strength heat-treated allow steel and finished with cadmium for protection. Threaded rods, washers and nuts are zinc plated steel. The forked end of the puller will fit behind the propeller hub with minimal clearance required. The shaft end of the puller has a recess to captivate and hold the propeller shaft in the center of the tool so it won’t slip off while in use.


Description:
(1 1/4” - 1 1/2”) Shaft diameter propeller puller. Clearance required between propeller hub and strut is 3/4” minimum.

Weight:
12 lbs.

PPF-107
2" Max. Shaft Diameter Heavy-Duty Propeller Puller

PRO-PULL Heavy Duty models are designed to remove 2, 3, most 4 and some 5 blade propellers on inboard shafts ranging from 1 1/4” - 3”. They are made of high strength heat-treated allow steel and finished with cadmium for protection. Threaded rods, washers and nuts are zinc plated steel. The forked end of the puller will fit behind the propeller hub with minimal clearance required. The shaft end of the puller has a recess to captivate and hold the propeller shaft in the center of the tool so it won’t slip off while in use.


Description:
(1 5/8” - 2”) Shaft diameter propeller puller. Clearance required between propeller hub and strut is 13/16” minimum.

Weight:
18 lbs.

PPF-104
2 1/2" Max. Shaft Diameter Heavy-Duty Propeller Puller

PRO-PULL Heavy Duty models are designed to remove 2, 3, most 4 and some 5 blade propellers on inboard shafts ranging from 1 1/4” - 3”. They are made of high strength heat-treated allow steel and finished with cadmium for protection. Threaded rods, washers and nuts are zinc plated steel. The forked end of the puller will fit behind the propeller hub with minimal clearance required. The shaft end of the puller has a recess to captivate and hold the propeller shaft in the center of the tool so it won’t slip off while in use.


Description:
(2 1/8” - 2 1/2”) Shaft diameter propeller puller. Clearance required between propeller hub and strut is 7/8” minimum.

Weight:
27 lbs.

PPF-116
3" Max. Shaft Diameter Heavy-Duty Propeller Puller

PRO-PULL Heavy Duty models are designed to remove 2, 3, most 4 and some 5 blade propellers on inboard shafts ranging from 1 1/4” - 3”. They are made of high strength heat-treated allow steel and finished with cadmium for protection. Threaded rods, washers and nuts are zinc plated steel. The forked end of the puller will fit behind the propeller hub with minimal clearance required. The shaft end of the puller has a recess to captivate and hold the propeller shaft in the center of the tool so it won’t slip off while in use.


Description:
(2 5/8” - 3”) Shaft diameter propeller puller. Clearance required between propeller hub and strut is 1” minimum.

Weight:
46 lbs.

PPF-106
1 1/4" - 2 1/2" 10 Ton Chain Propeller Puller

PRO-PULL 10 Ton Chain propeller puller is designed to remove 2, 3, 4, 5 and 6 blade propellers on inboard shafts ranging from 1 1/4” - 2 1/2”. It’s made of high strength heat-treated allow steel and finished with cadmium for protection. The chains are grade 70 transport rated and are plated with cadmium. All bolts, nuts and threaded parts are either grade 5 or heat-treated allow steel finished with cadmium. Four propeller shaft adapters are used to set puller up for a specific shaft size and/or if propeller blades extend forward of the propeller hub. Four hooks with safety rings are used on propellers that have no clearance between the propeller hub and the strut. The chains conform to propeller blades that overlap to accomodate easy propeller removal without damage to the blades. Complete with zinc plated case hardened box wrench to operate puller a container of waterproof grease, waterproof tool box and instructions with diagrams for use.


Description:
(1 1/4” - 2 1/2”) Shaft diameter 10 Ton chain propeller puller. Net weight of tool complete with accessories and stowage box.

Weight:
34 lbs.

PPF-115
Outboard and Stern-Drive Propeller Puller

PRO-PULL Outboard and Stern-Drive propeller puller is designed to remove any 2, 3, 4, 5 and 6 blade propeller. Structural components are made of heat-treated alloy steel finished with cadmium for protection. The bolt is grade 5 steel plated with cadmium. This puller will also remove any Duo-Prop. In addition this tool may also be used on many boats with inboard shafts up to 1 1/4” diameter. Comes complete with a waterproof carrying case for convenient stowage. This propeller puller requires no additional tools for operation.


Description:
Outboard and Stern-Drive propeller puller. Net weight includes puller with all accessories.

Weight:
22 lbs.

   (Bronze)            (Aluminum)
PPF-108 / PPF-108A
Bronze/Aluminum 6 in 1 Outboard & Stern-Drive Propeller Nut Wrench

PRO-PULL Outboard and Stern-Drive 6 in 1 propeller wrench is made of solid Nibral or Marine Grade Aluminum with six tools all in one easy to use handle. It will remove and install propeller nuts, cotter pins and propeller nut keepers on the following Outboard engines:


1. Mercury 75hp & up
2. OMC 60hp & up
3. Suzuki 55hp & up
4. Mariner 75hp & up
5. Yamaha 55hp & up

It will also work on all Stern-Drive engines made by: Mercury, OMC, Suzuki, Mariner, Yamaha and many others with either a 1 1/16” or 1 1/4” propeller nut. This tool comes packaged with a safety wrist strap to prevent toollose if accidentally dropped overboard.


Description:
PPF-108: Pro-Pull 6 in 1 Bronze Wrench.
PPF-108A: Pro-Pull 6 in 1 Aluminum Wrench.

PPF-108: 2 lbs.
PPF-108A: 1 lbs.

PPF-108:


PPF-108A:
PPF-113
(3/4” - 2”) Shaft diameter Versatile propeller puller

PRO-PULL Versatile propeller puller is designed to remove 2, 3, most 4 and some 5 blade propellers on inboard shafts ranging from 3/4” - 2.” It’s made of high strength heat-treated alloy steel and finished with cadmium for protection. The threaded rods, pivot pins and handle are manufactured using the finest stressproof steels available. The shaft end of the puller has a recess to captivate and hold the propeller shaft in the center of the tool so it can’t slip off while in use. The offset design of the pivot pins keep the hook of the tool on the propeller hub and pulls through the center of the propeller shaft. Minimal clearance between the propeller hub and strut are required due to the unique puller design. This propeller puller requires no addional tools for operation.


Weight:
16 lbs.

PPF-113-1
5/8" RH/LH Screw For 3/4" - 2" Versatile Propeller Puller

Weight:
0.8 lbs.



PPF-113-2
3/4" Screw For 3/4" - 2" Versatile Propeller Puller

Weight:
0.9 lbs.

PPF-216
3/4"-NC Propeller Nut Kit W/ Nylock Nut Cotter Pin, Brass Key & Grease