Made in USA

RAM® Small Camera Mounts

Universal Camera Mounting Solutions for Small Digital POV Cameras including Contour, Gobandit, GoPro®, Sony and all other cameras that will accept a 1/4"-20 male thread. These durable and sleek looking mounts are universal in application, built in AMERICA, and are backed by a LIFETIME WARRANTY.


RAM 1" Diameter Ball with 1/4"-20 Stud for Small Cameras

The RAP-B-366U, universal camera and camcorder base, consists of a 1" diameter rubber ball, connected to a round plate with 1/4"-20 camera thread. The round plate provides extra support and stability for cameras that rest on top of it. The male 1/4"-20 threaded steel stud will connect to any standard female thread found on camcorders and digital cameras.

Compatible Cameras:

Contour POV Cameras
Gobandit POV CAmeras
GoPro® POV Cameras
Sony POV Cameras

Material:

High Strength Composite

RAM 1" Diameter Ball with 1/4"-20 Stud for Small Cameras

  • RAP-B-366U
  • RAM 1" Diameter Ball with 1/4"-20 Stud for Small Cameras
  • Add to Cart

RAM Handlebar Rail Mount with SHORT Double Socket Arm & 1/4"-20 Camera Threaded Adapter

The RAM-B-231Z-A-366U consists of a zinc coated u-bolt base, SHORT double socket arm and 1" ball, connected to a round plate with 1/4"-20 camera thread. Included in this package is hardware that will accommodate rails from 0.50" to 1.25" in diameter. The base includes black cover caps to be placed over the exposed ends of the u-bolt. The composite rail adapter can narrow the rail to a minimum width of 0.5". The male 1/4"-20 threaded steel stud will connect to any standard female thread found on camcorders, digital cameras and POV cameras.

U-Bolt Dimensions:

Accommodates rails from 0.5" to 1.25" in diameter.

Material:

High Strength Composite & Powder Coated Marine Grade Aluminum

  • RAM-B-231Z-A-366U
  • RAM Handlebar Rail Mount with SHORT Double Socket Arm & 1/4"-20 Camera Threaded Adapter
  • Add to Cart

RAM Large Strap & U-bolt Base with 1/4"-20 Camera Threaded Adapter

The RAM-B-149Z-2-GOP1U consists of a steel strap base, u-bolt bases, double socket arm and 1" ball, connected to a round plate with 1/4"-20 camera thread. Designed for a clean installation, the RAM strap mount will accommodate most common roll bar sizes, allowing for the placement of the RAM rubber ball base. This mount can also be attached to smaller diameter handlebars on ATVs using the included hardware. The male 1/4"-20 threaded steel stud will connect to any standard female thread found on camcorders, digital cameras and POV cameras.

Rail Accommodation Dimensions:

Mount with Strap: 1.57" to a maximum of 3.15"
Mount with U-Bolt: 0.50" to a maximum of 1.25"

Material:

High Strength Composite & Powder Coated Marine Grade Aluminum

  • RAM-B-231Z-2-366U
  • RAM Large Strap & U-bolt Base with 1/4"-20 Camera Threaded Adapter
  • Add to Cart

RAM V-Base Clamp Base with Short Double Socket Arm & 1/4"-20 Camera Threaded Adapter

The RAM-B-108B-A-366U consists of a v-shaped strap base, SHORT double socket arm and 1" ball with 1/4"-20 threaded stell stud. The base accommodates rails from 1.0" to a maximum of 2.1" in diameter. To mount the base, place the saddle shaped plate on the rail then wrap the metal clamp strap around the rail and plate. Tighten the screw knob on the metal strap with a screw driver until the strap has a firm hold on the rail. The camera plate provides extra support and stability for cameras that rest on top of it. The male 1/4"-20 threaded steel stud will connect to any standard female thread found on camcorders and digital cameras.

U-Bolt Dimensions:

Accommodates rails from 1" to 2.1" in diameter.

Material:

High Strength Composite & Powder Coated Marine Grade Aluminum

  • RAM-B-108B-A-366U
  • RAM V-Base Clamp Base with SHORT Double Socket Arm & 1/4"-20 Camera Threaded Adapter
  • Add to Cart

RAM Twist Lock Suction Cup Mount with 1/4"-20 Camera Threaded Adapter

The RAM-B-224-1-366U consists of a 3.25" suction cup twist lock base, double socket arm and 1" ball, connected to a round plate with 1/4"-20 camera thread. The suction cup base is designed to have a strong hold on glass and non-porous plastic surfaces, including RAM adhesive disks. The male 1/4"-20 threaded steel stud will connect to any standard female thread found on camcorders, digital cameras and POV cameras.

Material:

High Strength Composite & Powder Coated Marine Grade Aluminum

  • RAM-B-224-1-366U
  • RAM Twist Lock Suction Cup Mount with 1/4"-20 Camera Threaded Adapter
  • Add to Cart

RAM Flat Surface Mount with SHORT Double Socket Arm & 1/4"-20 Camera Threaded Adapter

The RAM-B-202-A-366U consists of a 2.5" diameter round base that contain the universal AMPS hole pattern, SHORT double socket arm and 1" ball, connected to a round plate with 1/4"-20 camera thread. The male 1/4"-20 threaded steel stud will connect to any standard female thread found on camcorders, digital cameras and POV cameras. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles.

Material:

High Strength Composite & Powder Coated Marine Grade Aluminum

RAM Flat Surface Mount with SHORT Double Socket Arm & 1/4"-20 Camera Threaded Adapter

  • RAM-B-202-A-366U
  • RAM Flat Surface Mount with SHORT Double Socket Arm & 1/4"-20 Camera Threaded Adapter
  • Add to Cart

RAM Tele-Mountâ„¢ Telescoping Camera Pole Kit with 1/4"-20 Camera Threaded Adapter

The RAP-B-218-1-366U consists of a female hole base with 1" ball, double socket arm and 1" ball, connected to a round plate with 1/4"-20 camera thread. The female hole base will fit most common telescoping and extension poles. The male 1/4"-20 threaded steel stud will connect to any standard female thread found on camcorders, digital cameras and POV cameras.

Compatible Poles:

Most generic telescoping poles with 0.715" OD Threads
Ettore 42004 4-Feet Reach Extension Pole

Material:

High Strength Composite

  • RAP-B-218-1-366U
  • RAM Tele-Mountâ„¢ Telescoping Camera Pole Kit with 1/4"-20 Camera Threaded Adapter
  • Add to Cart