RAM Mounts is a corporate brand of National Products Inc. (NPI) in Seattle, Washington. NPI offers an adaptable set of manufacturing capabilities with centralized manufacturing, production, and distribution operations. This means you receive the strongest mount available and the most innovative technology.
The rubber ball and socket design offers a secure hold with infinite options and vibration dampening for demanding environments.
Our philosophy is simple—build the best products available. And so our warranty is simple too. If we built it, we guarantee it. We are confident in the quality of our products, and with our warranty, you can be too.
MADE IN AMERICA
We don’t use call-centers, we don’t outsource labor, and we don’t ship opportunities overseas. Our all-American staff designs, manufactures, assembles, and sells our products right here, and ships them straight to you.
High Strength Composite and Powder Coated Marine Grade Aluminum
The use of the stabilizer foot is recommended to reduce bounce in certain applications. Simply replace one of the carriage bolts holding the pole system or riser with the stabilizer foot as shown. You will need a ½” box wrench to tighten the hardware. Slide the bolt through the foot then slide a lock washer over the thread so it rest on the foot. Place a nut over the thread and tighten to secure the foot over the head of the bolt. Next, thread another nut over the bolt and slide another lock washer over the thread. Have this nut and washer about 1 inch off the foot prior to final adjustment. Now, pass the foot up through the base from the bottom. Once through the base, slide the flat washer, lock washer, then thread the nut over the bolt. Position foot while hardware is loose so it is supporting the base off the floor. Once in position, tighten the nut so that it forces the foot down against the vehicle floor board.
Part number reflects product packaged in clear clam shell for store shelf display.
RAM Laptop Mounts Page