Tab-Tite Cradle
The RAM-HOL-TAB6U is not a complete mounting solution, but contains hardware to attach to any RAM mount that contains the universal AMPs hole pattern.

Tab-Tite
The RAM-HOL-TAB6U consists of a spring loaded backplate and custom support cups. This spring loaded design makes it easy to load and unload your iPad Air, along with keeping it secure while on the go. Cup ends are designed to optimize the functionality of your tablet, allowing access to audio jacks, usb, power, and other ports, your iPad Air can be used just as it was intended.

Features:
  • Support cups contain open slots to accommodate for tablets of various sizes
  • Back plate can support various size support cups
  • Spring loaded tension provides secure support for your tablet
  • Spring loaded cradle allows for quick release of your tablet
  • Full access to all ports

Specifications:
  • Docking Cradle: No
  • Locking Cradle: No
  • Fit's iPads WITH Cases: No
  • Fit's iPads WITHOUT Cases: Yes
  • Low Vibration Environment: Yes
  • High Vibration Environment: No

Dimensions:
  • Height: 8.25" minimum to 10.75" maximum
  • Width: Maximum width to 6.8"
  • Depth: 0.5" maximum

Material:
High Strength Composite


Product Number:
RAM-HOL-TAB6U
Retail:




Tab-Tite Complete Mounting Kits
The following mounts include the Tab-Tite cradle, mounting hardware and mounting kit.

Twist Lock Suction Cup Mount

Description:
The Twist Lock Suction Cup Mount consists of a single 3.25" twist lock suction cup base, double socket arm, diamond base adapter and universal Tab-Tite cradle. The suction cup base is designed to have a strong hold on glass and non-porous plastic surfaces. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm, allowing for almost infinite adjustment and perfect viewing angles.

Ordering Information:
For a complete mounting solution all RAM components listed below must be added to your shopping cart.
Product Number:
RAM-HOL-TAB6U

Retail:


Product Number:
RAM-B-166U

Retail:


RAM Pod I Universal No-Drill® Vehicle Mount

Description:
The RAM POD I Universal No-Drill® Vehicle Mount consists of the RAM POD I universal No-Drill® vehicle base, 18" rigid aluminum rod, socket system and universal Tab-Tite cradle. The base of the mount connects to your seat rail without any drilling necessary. The 18" rigid aluminum rod can be bent to position your device to its optimum viewing location.

Ordering Information:
For a complete mounting solution all RAM components listed below must be added to your shopping cart.
Product Number:
RAM-HOL-TAB6U

Retail:


Product Number:
RAM-B-316-1-238U

Retail:


Flex Adhesive Base Mount

Description:
The Flex Adhesive Base Mount consists of a flex adhesive base with 1" ball, double socket arm, diamond base adapter and Tab-Tite cradle. Using a PSA stick pad, put the flex adhesive mount practically anywhere you want to keep your portable electronics easy to see and always within your reach. Designed with a very small foot print, finding a home on your kayak, boat or vehicle dash is easy. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm, allowing for almost infinite adjustment and perfect viewing angles.

Ordering Information:
For a complete mounting solution all RAM components listed below must be added to your shopping cart.
Product Number:
RAM-HOL-TAB6U

Retail:


Product Number:
RAP-B-378-238U

Retail:


RAM-A-CAN II Universal Cup Holder Mount

Description:
The RAM-A-CAN II Universal Cup Holder Mount consists of the RAM-A-CAN cup holder base, double socket arm, diamond base adapter and universal Tab-Tite cradle. Included are support fins that flex and can be trimmed, making the cup holder base conform to most vehicle cup holders. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm, allowing for almost infinite adjustment and perfect viewing angles.

Ordering Information:
For a complete mounting solution all RAM components listed below must be added to your shopping cart.
Product Number:
RAM-HOL-TAB6U

Retail:


Product Number:
RAP-299-3-B-102U

Retail:


Flat Surface Drill-Down Mount

Description:
The Flat Surface Drill Down Mount consists of a 2.5" diameter round base with the universal AMPS hole pattern, double socket arm, diamond base adapter and Tab-Tite cradle. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm, allowing for almost infinite adjustment and perfect viewing angles. This mount requires drilling.

Ordering Information:
For a complete mounting solution all RAM components listed below must be added to your shopping cart.
Product Number:
RAM-HOL-TAB6U

Retail:


Product Number:
RAM-B-138U

Retail:


Yoke/Rail Clamp Mount

Description:
The Yoke/Rail Clamp Mount consists of a yoke clamp base, double socket arm, diamond base adapter and Tab-Tite cradle. The "QUICK RELEASE" yoke clamp base will fit rails from 0.625" to a maximum of 1.25". The 1" rubber ball is at a right angle to the plane of the mount; when connected to a rail, the ball sits parallel to the rail. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm, allowing for almost infinite adjustment and perfect viewing angles.

Ordering Information:
For a complete mounting solution all RAM components listed below must be added to your shopping cart.
Product Number:
RAM-HOL-TAB6U

Retail:


Product Number:
RAM-B-121-238U

Retail:


Rail/Handlebar Mount

Description:
The Rail/Handlebar Mount consists of a zinc coated u-bolt base, double socket arm, diamond base adapter and Tab-Tite cradle. Included in this package is hardware that will accommodate rails from 0.50" to 1.25" in diameter. The base includes black cover caps to be placed over the exposed ends of the u-bolt. The included composite rail adapter can narrow the rail to a minimum width of 0.5". The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm, allowing for almost infinite adjustment and perfect viewing angles.

Ordering Information:
For a complete mounting solution all RAM components listed below must be added to your shopping cart.
Product Number:
RAM-HOL-TAB6U

Retail:


Product Number:
RAM-B-149ZU

Retail:


Accessories
RAM Bluetooth Keyboard

Description:
RAM offers an affordable Bluetooth keyboard that can be used with any tablet for efficient and comfortable data entry. Pair this Bluetooth keyboard with the RAM Tablet Keyboard Adapter with Roto-View and you have the ultimate solution for your business or personal use. The keyboard attaches magnetically to the RAM Keyboard Adapter allowing for quick and easy removal and replacement.

Dimensions:
11.2" x 4.72" x .91"

Product Number:
RAM-KEY1-BT


Retail:



Keyboard Accessory for Tablets with Roto-View

Description:
With the RAP-TAB-KEY1-300U you can mount a Bluetooth keyboard cost effectively in conjunction with your RAM Tablet mounting solution, using this unique design. This simple design clamps an 8" tube between any RAM tablet cradle, and the Patent Pending Roto-View round adapter plate allows for adjustment to accommodate many tablet configurations, including use in both landscape and portrait mode. The 8" tube has a 1" ball on the end which connects to a standard RAM double socket arm and Magnetic Power Plate III for easy placement and removal of the keyboard.

Dimensions:
Overall Length: 13.75"
Tube Length: 8"


Product Number:
RAP-TAB-KEY1-300U


Retail:



Roto-View Adapter Plate

Description:
The easy-to-use interface of your tablet makes for a user friendly experience, while on the go. Now you can optimize this mobile experience with the Roto-View; an adapter plate that allows for adjustment to accommodate many tablet viewing configurations. The Roto-View utilizes multiple detents to adjust the tablet to the most popular viewing angles, including landscape and portrait mode. No need to loosen the knob of your double socket arm to reposition your tablet. Instead, simply rotate the cradle to achieve the same result. Compatible with a wide range of tablet cradles and mounts, RAM now offers yet another "easy-to-use" product to help enhance your mobile experience.

Product Number:
RAM-HOL-ROTO1U


Retail:


This is a tip that has HTML-formated content, including an image.