|
|
|
|
|
|
|
The RAM-B-138-GA43LU consists of a double socket arm, locking knob, 2.5" diameter round base with the universal AMPS hole pattern, diamond adapter base and custom high strength composite locking case for the Garmin dezl™. The locking case features the ability to secure your Garmin dezl™ in place adding much needed protection and enables full access to the screen, power plug, and memory card slot. The case consists of a front and back cover that can be secured together using standard pop rivets or security screws. The locking case also features a unique cable retention system that prevents accidental unplugging of the USB cable. Paired with a RAM locking knob, this solution is the ideal accessory for deterring theft or accidental removal of the mounted GPS device. Designed into the mount is a 1" diameter patented rubber ball and socket system with adjustment points at the base and cradle. With a twist of the arm knob, you can move the flat surface dezl™ mount to your optimum viewing position.
This mount is designed to hold the following devices:
Garmin dezl™ 560LMT
Garmin dezl™ 560LT
Locking Case Features:
1. Open access to all electronic ports including audio port, speaker/mic and mini USB
2. Custom pocket for factory dock
3. Rugged construction deters theft and protects vulnerable areas of device
4. Secures at 4 corners with provided hardware
5. Will not obstruct GPS signal
6. Secure USB power connection with wire retention
7. Built-in sun visor
Material:
High Strength Composite and Powder Coated Marine Grade Aluminum
Ball Size:
1" Rubber Ball "B" Size
Note:
The "U" in the part number reflects product packaged in poly bag.
Special Information:
Designed for use with third party EOBR equipment and recording hours of service in compliance with CSA (compliance, safety, accountability) initiative. To learn more visit the Federal Motor Carrier Safety Administration (FMCSA) website. http://csa.fmcsa.dot.gov/
For more information about Garmin Commercial Solutions and PND-based Mobile Resource Management (MRM) Solutions, visit the Garmin website. http://www8.garmin.com/solutions/pnd/index.jsp
Related Links:
Garmin dezl™ Locking Case New Products Page
RAM GPS Mounts Page
Image Gallery:
|
Sorry, no parts were found.
|
|
|
|
|
|
|
Recommended Mounts
RAM FLEX ADHESIVE MOUNT SYST 1" BALL
Product Number:RAP-B-378U
Retail: $14.54
RAM 2 7/16" X 1 5/16" BASE WITH BALL
Product Number:RAM-B-238U
Retail: $6.76
RAM RAIL BASE WITH BALL & ZINC U-BOLT
Product Number:RAM-B-231ZU
Retail: $14.75
RAM WITH U-BOLT FOR 3/4" TO 1" DIAMETER
Product Number:RAM-B-231U
Retail: $14.54
RAM BASE WITH U-BOLT & UTV STRAP BASE
Product Number:RAM-B-231-2
Retail: $23.91
RAM BASE WITH U-BOLT & UTV STRAP BASE
Product Number:RAM-B-231Z-2
Retail: $21.66
RAM DOUBLE U-BOLT BASE WITH 1" BALL
Product Number:RAM-B-235U
Retail: $22.48
RAM .87 X 2.25 WITH 11 MM HOLE & 1" BALL
Product Number:RAM-B-252U
Retail: $13.00
RAM BASE WITH 9 MM HOLE AND 1" BALL
Product Number:RAM-B-272U
Retail: $13.11
RAM CYCLE HANDLEBAR BASE WITH 1 BALL
Product Number:RAM-B-309-1U
Retail: $12.34
RAM CYCLE HANDLEBAR BASE W 2 BALLS
Product Number:RAM-B-309-2U
Retail: $23.50
RAM MODULAR MOTO BASE WITH DOUBLE BALL
Product Number:RAM-B-309-6U
Retail: $17.97
CLUTCH,BRAKE,UBOLT COMBO HANDLEBAR KIT
Product Number:RAM-B-309-7U
Retail: $16.90
CLUTCH,BRAKE,UBOLT COMBO 2 BALL KIT
Product Number:RAM-B-309-8U
Retail: $28.36
RAM CYCLE STEM BASE WITH 1" DIAMETER BALL
Product Number:RAM-B-342U
Retail: $16.59
RAM RESERVOIR COVER CENTER BALL
Product Number:RAM-B-345U
Retail: $23.81
RAM RESERVOIR COVER SIDE BALL
Product Number:RAM-B-346U
Retail: $23.30
RAM CYCLE PIVOT BASE WITH STUD
Product Number:RAM-B-360U
Retail: $22.37
RAM MOTORCYCLE BASE W HOLE M8 SCREW
Product Number:RAM-B-367U
Retail: $11.62
RAM 3.3" DIAMETER SUCTION CUP W 1" BALL
Product Number:RAM-B-224-1U
Retail: $18.79
RAM V BASE BALL AND STRAPS 1/2"-2"
Product Number:RAM-B-108BU
Retail: $18.43
RAM BASE WITH 1/4"-20 HOLE HEX & 1" BALL
Product Number:RAM-B-273U
Retail: $14.08
RAM BASE WITH 1/4"-20 HOLE & 1" BALL
Product Number:RAM-B-348U
Retail: $7.83
RAM CLAMP FOR YOKE MOUNTING
Product Number:RAM-B-121BU
Retail: $25.70
RAM 1" X 1" U-CHANNEL CLAMP WITH 1" BALL
Product Number:RAM-B-259U
Retail: $22.63
RAM CURVED YOKE MOUNT PLATE
Product Number:RAM-B-125BU
Retail: $13.11
RAM CLAMP BASE WITH BALL 1.5 MAX WIDTH
Product Number:RAM-B-247U-15
Retail: $32.36
RAM CLAMP BASE WITH BALL 1.7 MAX WIDTH
Product Number:RAM-B-247U-17
Retail: $31.85
RAM CLAMP BASE WITH BALL 2 MAX WIDTH
Product Number:RAM-B-247U-2
Retail: $33.02
RAM CLAMP BASE WITH BALL 2.5 MAX WIDTH
Product Number:RAM-B-247U-25
Retail: $34.41
RAM CLAMP BASE WITH BALL 3 MAX WIDTH
Product Number:RAM-B-247U-3
Retail: $35.53
RAM CLAMP BASE WITH BALL 4 MAX WIDTH
Product Number:RAM-B-247U-4
Retail: $40.81
Customers Who Bought This Item Also Bought
Customers Who Bought This Item Also Bought
(Page 1 of 1)
|